Mittaus ja instrumentaatio (3ov) 160227

Measurement, Scaling and Instrumentation

Luennot 24 h, harjoitukset 24 h, kirjallisuus ja kuulustelut 72 h

Massan ja tilavuuden mittaus. Raaka-aineiden, puolivalmisteiden ja tuotteiden fysikaalisten ja kemiallisten ominaisuuksien mittaus. Mittaukseen perustuvia säätötekniikan sovelluksia.

 

 

Lectures:

Monday, Tuesday, Wednesday

 

 

16.2., 8-10, Room MA155                      Tilavuus ja tilavuuden mittaus

17.2., 10-12, Room MA155                    Massa ja massan mittaus

18.2., 10-12, Room MA155                    Kosteus ja kosteuden mittaus

 

23.2., 8-10, Room MA155                      Signaalien käsittely

24.2., 10-12, Room MA155                    Suodatus, Integrointi, Fourier-muunnos

25.2., 10-12, Room MA155                    Spektroskopiatekniikat

 

1.3., 8-10, Room MA155                        Akustiset tekniikat

2.3., 10-12, Room MA155                      Kalorimetriatekniikat

3.3., 10-12, Room MA155                      Termografiatekniikat

                       

8.3., 8-10, Room MA155                        Polarisaatiotekniikat

9.3., 10-12, Room MA155                      Vaihe-erotekniikat

10.3., 10-12, Room MA155                    Diffraktiotekniikat

 

 

Exercises March 2004.

Exercise consists of review of assigned literature, to be selected from the list below. This review will be presented as an oral presentation. No written report is required, provided the oral presentation is satisfactory. However, the talk may have to be complemented in writing.

 

Reporting Sessions for Exercises on March 24th (Room B6) and 25th (Room B6), at 16-18.

 

 

Literature:

Willard, H. H., Merritt, L. L., Dean, J. A. and Settle, F. A., Instrumental methods of analysis. Wadsworth, Belmont, CA, 7th ed. 1988. 895 p. – pp. 1-39, 97-117, 761-785 .

Young, H. D. and Freedman, R. A., University Physics. Addison-Wesley, 10th Ed. 2000., pp.  593-619, 1053-1084.

 

 

Final examination March 29, 2003 at 16-18, Room B6.

Possibility for eventual renewals April 19, 2003 at 16-18, Room B6.

In addition, the Dean has decided that an examination can be taken in the common examination of June 4, 2004.

 

 

Exercise topics:

 

Puuaineen kemiallisen rakenteen mittaus ja makroskooppisten ominaisuuksien ennustaminen infrapunaspektroskopiaa käyttäen.

4327. Brust, G., Infrared spectroscopy. http://www.psrc.usm.edu/macrog/floor5.htm

4327b. Brust, G., Infrared vibrational modes.

http://www.psrc.usm.edu/macrog/irabs.htm

4573. Schimleck, L. R., Wright, P. J., Michell. A. J. and Wallis, A. F., Near-infrared spectra and chemical compositions of Eucalyptus globulus and E. nitens plantation woods. Appita 50:40-46 (1997).

4394. Kindl, W., Schwanninger, M., Teischinger, A. and Hinterstoisser, B., Relating chemical composition of wood to its mechanical properties: results from UV-microscopic and near infrared microscopic studies. Fist International Conference of the European Society of Wood Mechanics,  April 19-21, 2001, Lausanne, Swizerland, pp. 15-19.

4395. Niemz, P., Körner, S., Wienhaus, O., Flamme, W. and Balmer, M., Orientierende Untersuchungen sur Anwendung der NIR-Spektroskopie für die Beurteilung des Mischungsverhältnisses Laubholz/Nadelholz und des Klebstoffanteils in Spangemischen. (Applying NIR spectroscopy for evaluation of the hardwood softwood ratio and resin content in chip mictures.) Holz als Roh- und Werkstoff 50:25-28 (1992).

4270. Hauksson, J. B., Bergqvist, G., Bergsten, U., Sjöström, M. and Edlund, U., Prediction of basic wood properties for Norway Spruce.  Interpretation of near infrared spectroscopy data using partial least squares regression. Wood Sci. Tech. 35(6):475-485 (2001).

 

Sellun ja sulppukomponenttien kemiallisen rakenteen selvittäminen infrapunaspektroskopiaa käyttäen.

4327. Brust, G., Infrared spectroscopy. http://www.psrc.usm.edu/macrog/floor5.htm

4327b. Brust, G., Infrared vibrational modes.

http://www.psrc.usm.edu/macrog/irabs.htm

4579. Åkerholm, M. and Salmén, L., Dynamic FTIR spectroscopy for carbohydrate analysis of wood pulps. J. Pulp Paper Sci. 28(7):245-249 (2002).

4580. Backa, S. and Brolin, A., Determination of pulp characteristics by diffuse reflectance FTIR. Tappi 74(5):218-226 (1991).

4581. Easty, D. B., Berben, S. A., DeThomas, F. A. and Brimmer, P. J., Near-infrared spectroscopy for the analyisis of wood pulp: quantifying hardwood-softwood mixtures and estimating lignin content. Tappi 73(10):257-261 (1990).

4582. Hsu, N. N.-C., Schroeck, J. J. and Errigo, L., Identification of the origins of stickies in deinked pulp. Tappi 80(4):63-68 (1997).

 

Metsäteollisuusprosessien ohjaus ja paperituotteiden mekaanisten ominaisuuksien selvittäminen infrapunaspektroskopiaa käyttäen.

3829. Furumoto, H., Lampe, U., Meixner, H. and Roth, C., Infrared analysis for process control in the pulp and paper industry. Tappi 83(9) (2000). 9 p.

4586. Schultz, T. P. and Burns, D. A., Rapid secondary analysis of lignocellulose: comparison of near infrared (NIR) and fourier transform infrared (FTIR). Tappi 73(5):209-212 (1990).

4583. Morrison, P. W. Jr., Cosgrove, J. E., Carangelo, R. M., Solomon, P. R., Leroueil, P. and Thorn, P. A., Fourier transform infrared (FTIR) instrumentation for monitoring recovery boilers. Tappi 74(12):68-78 (1991).

 

Sellun ja keittonesteiden ominaisuuksien selvittäminen UV-spektroskopiaa käyttäen.

4404. Ye C., Räty J., Nyblom I., Hyvärinen H-K. and Moss P., Estimation of lignin content in single, intact pulp fibers by UV photometry and VIS Mueller matrix polarimetry. Nordic Pulp & Paper Vol. 16, No. 2, p. 143-148 (2001).

4576. Evtuguin, D. V., Daniel, A. I. D. and Pascoal Neto, C., Determination of hexeuronic acid and residual lignin in pulps by UV spectroscopy in cadoxen solutions. J. Pulp Paper Sci. 28(6):189-192 (2002).

4577. Chai, X. S. , Li, J. and Zhu, J. Y., Simultaneous and rapid analysis of hydroxide, sulphide and carbonate in kraft liquors by attenuated total reflection UV spectroscopy. J. Pulp Paper Sci. 28(4):105-109 (2002).

 

Puuaineen koostumuksen selvittäminen UV-mikroskopiaa käyttäen.

1667. Scott, J. A. N, Procter, A. R., Fergus, B. J. & Goring, D. A. I. The application of ultraviolet microscopy to the distribution of lignin in wood. Description and validity of the technique. Wood Sci. Tech. 3:73-92  (1969).

48. Fergus, B. J., Procter, A. R., Scott, J. A. N. & Goring, D. A. I. 1969. The distribution of lignin in sprucewood as determined by ultraviolet microscopy. Wood Sci. Tech. 3(2):117-138.

1669. Fergus, B. J. and Goring, D. A. I., The distribution of lignin in birch wood as determined by ultraviolet microscopy. Holzforschung 24(4):118-124 (1970).

 

Puuaineen ominaisuuksien selvittäminen mikroaaltojen avulla.

4288. Martin, P., Collet, R., Barthelemy, P. and Roussy, G., Evaluation of wood characteristics: internal scanning of the material by microwaves. Wood Sci. Tech. 21:361-371 (1987).

4598. Eskelinen, P. and Eskelinen, H., A K-band microwave measuring system for the analysis of tree stems. Silva Fenn. 34(1):37-45 (2000).

4599. Montoro, T., Manrique, E. amd González-Riviriego, A., Measurement of the refracting index of wood microwave radiation. Holz als Roh- und Werkstoff 57:295-299 (1999).

 

Raman-spektroskopia kuitu- ja polymeerianalyysissä.

4255. Galiotis, C., A study of mechanisms of stress transfer in continuous- and discontinuous-fiber model composites by laser raman spectroscopy. Comp. Sci. Techn. 48:15-28 (1993).

3458. Hamad, W. Y. and Eichhorn, S., Deformation micromechanics of regenerated cellulose fibers using raman spectroscopy. J. Eng. Mat. Tech. 119:309-313 (1997).

2357. Hamad, W. and Eichhorn, S., Raman spectroscopic analysis of the microdeformation in cellulosic fibers. 11th Fundamental Research Symposium, Cambridge, England, Sept. 21-26, 1997, pp. 505-519.

4255. Galiotis, C., A study of mechanisms of stress transfer in continuous- and discontinuous-fiber model composites by laser raman spectroscopy. Comp. Sci. Techn. 48:15-28 (1993).

 

Tukkien ominaisuuksien akustinen selvittely

3941. Tsehaye, A., Bunchanan, A. H. and Walker, J. C. F., Sorting of logs using acoustics. Wood Sci. Tech. 34(4):337-344 (2000).

4289. Han, W. and Birkeland, R., Ultrasonic scanning of logs. Industrial Metrology 2:253-281 (1992).

 

Mekaanisten aaltojen kulku puussa ja puupohjaisissa materiaaleissa

4313. Kang, H. and Booker, R. E., Variation of stress wave velocity with MC and temperature. Wood Sci. Tech. 36(1):41-54 (2002).

2254. Craver, J. K. and Taylor, D. L., Nondestructive sonic measurement of paper elasticity. Tappi 48(3):142-147 (1965).

4596. Sasaki, Y., and Hasegawa, M., Ultrasonic measurement of applied stresses in wood by acoustoelastic birefringent method. 12th International Symposium on Nonderstructive Testing of Wood, Sopron, Hungary, September 2000, http://www.ndt.net/article/v06n03/sasaki/sasaki.htm

1186. Batten, G. L., The differences between sonically and mechanically determined elastic moduli of paper. In: Caulfield, D. F., Passaretti, J. D. and Sobczynski, S. F. (eds.), "Materials Interactions Relevant to the Pulp and Paper and Wood Industries", Vol. 197, pp. 163-172. Materials Research Society, Pittsburg, 1990.

 

Materiaalielementtien murtumisen havainnointi akustisen emission avulla

1196. Yamauchi, T. and Murakami, K., Acoustic and optical measurements during the straining of paper.  1991 International Paper Physics Conference, September 22-26, Kona, Hawaiji , pp. 681-684.

3815. Berg, J.-E. and Gradin, P. Effect of temperature on fracture of spruce in compression, investigated by use of acoustic emission monitoring. J. Pulp Paper Sci. 26(8):294-299 (2000).

4108. Aicher, S., Höfflin, L. amd Dill-Langer, G., Damage evolution and acoustic emission of wood at tension perpendicular to fiber. Holz als Roh- und Werkstoff 59:104-116 (2001).

4099b. Landis, N. E. and Whittaker, D. B., Acoustic emission as a measure of wood fracture energy. Fist International Conference of the European Society of Wood Mechanics,  April 19-21, 2001, Lausanne, Swizerland, pp. 295-303.

 

Soluseinämän rakenteen muutokset kuivauksessa, ja näiden muutosten havainnointi

4034. Thuvander, F., Wallström, L., Berglund, L. A. and Lindberg, K. A. H., Effects of an impregnation procedure for prevention of wood cell wall damage due to drying. Wood Sci. Tech. 34(6):473-480 (2001).

4401. Wallström, L., and Lindberg, K. A. H., Distribution of added chemicals in the cell of high temperature dried and green wood of swedish pine, Pinus sylvestris. Wood Sci. Tech. 34(4):327-336 (2000).

826. Van den Akker, J. A.: Some theoretical considerations on the mechanical properties of fibrous structures. In: Bolam, F.(ed.), Formation and struc­ture of paper Vol I. Transactions of the sympo­sium held at Oxford, September 1961. Technical Section of the British Paper and Board Makers' Associa­tion, London 1962, pp. 205-241.

 

Veden jäätyminen puussa ja sellussa

4361. Nakamura, K., Hatakeyama, T., and Hatakeyama, H., Studies on bound water of cellulose by differential scanning calorimetry. Text. Res. J. 51(9):607-613 (1981).

3531. Maloney, T. and Paulapuro, H., The formation of pores in the cell wall. J. Pulp Paper Sci. 25(12):430-436 (1999).

 

Metsäteollisuuden lämpökamerasovellukset.

1940. Tanaka, A., Otsuka, Y. and Yamauchi, T., In-plane fracture toughness testing of paper using thermography. Tappi 80(5):222-226 (1997).

2165. Kiiskinen, H. T., Kukkonen, H. K., Pakarinen, P. I. And Laine, A. J., Infrared thermography examination of paper structure. Tappi 80(4):159-162 (1997).

4087. Hojjatie, B., Abedi, J. and Coffin, D. W., Quantitative determination of in-plane moisture distribution in paper by infrared thermography. Tappi 84(5) (2001). 11 p.

4589. Maggard, J., On-line measurement of dryer performance. Tappi 78(3):264-265 (1995).

4590. Tanaka, T. and Divós, F., Wood inspection by thermography. 12th International Symposium on Nonderstructive Testing of Wood, Sopron, Hungary, September 2000, http://www.ndt.net/article/v06n03/tanaka/tanaka.htm.

4597. Wyckhuyse, A. and Maldague, X., A study of wood inspection by infrared thermography, Parti I: wood pole inspection by infrared thermography. Res. Nonderstr. Eval. 2001:1-12.

1670. Scott, J. A. N. and Goring, D. A. I., Photolysis of wood microsections in the ultraviolet microscope. Wood Sci. Tech 4:237-239 (1970).

 

Soluseinämän kerrosten rakenteen määrittäminen soluseinän kahtaistaittavuuden perusteella.

1467. Manwiller, F. G., Senarmont compensation for determining fibril angles of cell wall layers. For. Prod. J. 16(10):26-30 (1966).

1090. Page, D. H. and El-Hosseiny, F. The birefringerence of wood pulp fibers and the thickness of the S1 and S2 layers. Wood and Fiber 6(3):186-192 (1974).

1086. Crosby, C. M., De Zeeuw, C. and Marton, R.,  Fibrillar angle variation in red pine determined by Senarmont compensation. Wood Sci. Tech. 6:185-195 (1972).

1470. Preston, R. D., The fine structure of the walls of the conifer tracheid.  II. Optical properties of dissected walls in Pinus insignis. Proc. R. Soc. B 134(875):202-218 (1947).

 

Mikrofibrillikulman määrittäminen polarisoidun valon avulla.

1081. Page, D. H., A method for determining fibrillar angle of wood tracheids. J. Micros. 90(2):137-143 (1969).

1089. Leney, L., A technique for measuring fibril angle using polarized light. Wood Fiber 13(1):13-16 (1981).

4603. El-Hosseiny, F. and Page, D. H., The measurement of fibril angle of wood fibres using polarized light. Wood and Fiber 5(3):208-214 (1973).

 

Mikrofibirllikulman määrittäminen röntgensateilyn interferenssin avulla.

1464. Cave, I. D., Theory of X-ray measurement of microfibril angle in wood. For. Prod. J. 16(10):37-42 (1966).

1468. Meylan, B. A., Measurement of microfibril angle by X-ray diffraction. For. Prod. J. 17(5):51-58 (1967).

1105. Prud'homme, R. E. and Noah, J., Determination of fibril angle distribution in wood fibers: a comparison between thex-ray diffraction and the polarized microscope methods. Wood Fiber 6(4):282-289 (1975).

 

Röntgendensitometria.

4600. Gureyev, T. E. and Evans, R., A method for measuring vessel-free density distribution in hardwoods. Wood Sci. Tech. 33:31-42 (1999).

4601. Stanzl-Tschegg, S. E., Filion, L., Tschegg, E. K. and Reiterer, A., Strength properties and density of SO2 polluted spruce wood. Holz als Roh- und Verkstoff 57:121-128 (1999).

4602. Divos, F., Szegedi, S. and Raics, P., Local densitometry of wood by gamma back-scattering. Holz als Roh- und Verkstoff. 54:279-281 (1996).

4240. Bergsten, U., Lindeberg, J., Rindby, A. and Evans, R., Bach measurements of wood density of intact or prepared drill cores using x-ray microdensitometry. Wood Sci. Tech. 35(5):435-452 (2001).

 

Tukkien sisäisen rakenteen selvittäminen röntgensäteilyn avulla.

3628. Grundberg, S., X-ray log scanner - a tool for control of the sawmill process. Luleå Univ. of Technology, Div. of Wood Technology, Skellefteå, SE, Report 1999:37.

3629. Oja, J., X-ray measurement of properties of saw logs. Luleå Univ. of Technology, Div. of Wood Technology, Skellefteå, SE, Report 1999:14.

 

Tiheyden mittaus valon transmissiointensiteetin perusteella.

3992. Palviainen, J. and Silvennoinen, R., Inspection of wood density by spectrophotometry and diffractive optical element based sensor. Meas. Sci. Tech. 12:1-8 (2001).

4413. Palviainen, J., Sorjonen, M., Silvennoinen, R. and Peiponen, K.-E., Optical sensing of colour print on paper by a diffractive optical element. Meas. Sci. Tech. 13:N31-37 (2002).

 

Anisotropian mittaus valon sironnan perusteella

4414. Simonaho, S.-P., Palviainen, J., Tolonen, Y. and Silvennoinen, R., Determination of wood grain direction from laser light scattering pattern. Optics and Lasers in Engineering  41(1):95-103 (2004).

3992. Palviainen, J. and Silvennoinen, R., Inspection of wood density by spectrophotometry and diffractive optical element based sensor. Meas. Sci. Tech. 12:1-8 (2001).

4413. Palviainen, J., Sorjonen, M., Silvennoinen, R. and Peiponen, K.-E., Optical sensing of colour print on paper by a diffractive optical element. Meas. Sci. Tech. 13:N31-37 (2002).

 

Veden tunnistus ja luonnehdinta ydinmagneettinen resonanssin avulla

4592. Guzenda, R. and Wieslaw, O., Identification of free and bound water content in wood by means of NMR relaxometry. 12th International Symposium on Nonderstructive Testing of Wood, Sopron, Hungary, September 2000, http://www.ndt.net/article/v06n03/guzenda/guzenda.htm

4287. Chang, S. J., Olson, J. R. and Wang, P. C., NMR imaging of internal features in wood. For. Prod. J. 39(6):43-49 (1989).

1960. Capitani, D., Segre, A. L., Attanasio, D., Blicharsca, B., Focher, B. and Capretti, G., 1H NMR relaxation study of paper as a system of cellulose and water. Tappi 79(6):113-122 (1996).